Teltonika RUT500 3G Router – Now Only £70.00 each

On July 11, 2016

If you need a cheap 3G router for your M2M application then the Teltonika RUT500 3G Router with DIN Rail Mounting Kit could be just the item you are looking for.

With the new low price of just £70.00 + VAT each the Teltonika RUT500 provides excellent value for money.

Teltonika RUT500 Front View

The RUT500 has an embedded 3G module so you insert your 3G mobile broadband SIM card into the SIM slot which is accessed by removing the front plate where the antennas are connected and inserting your SIM card.  The RUT500 will work with any UK mobile broadband network SIM card as well as 3G Fixed IP SIM Cards.  Once you have inserted your SIM card you can replace the cover and connect your Cellular Antenna and WiFi Antenna.  The RUT500 3G Router is supplied as standard with 1 x elbow joint antenna for Mobile / Cellular reception and 1 x elbow joint WiFi antenna.  If you are using the RUT500 in a location with poor signal strength then you can use a different antenna which can be located nearby where there is a good mobile signal and deliver the signal along the length of antenna cable to the router.  A popular 3G antenna used with the RUT500 is the Fullband® FBO-4G Wall Mounted Omni-Directional Antenna which is supplied with 5m long cable with SMA Male connector to connect directly to the RUT500 antenna port.

The Teltonika RUT500 3G Router is also supplied with a CAT5e Patch Cable and a DIN Rail mounting kit and a UK mains power supply so you have everything you need to get connected.

The RUT500 router is an M2M router so includes things link ping reboot which is the method that these types of 3G router use to monitor the 3G internet connection and when the router gets disconnected by the mobile network the router can realise this and reboot and re-establish the connection.  3G routers like the Teltonika RUT500 need this ping reboot feature because 3G mobile broadband is an always available service and not an always on service which basically means that due to limited availability of services at mobile basestations, when new users request a 3G connection the network will drop existing connections so if you use a router without this ping reboot feature at a remote location and it gets disconnected by the mobile network then you will need to drive to site every time to manually reboot your router.

Teltonika Product Range Update

On April 6, 2016

We currently stock the following Teltonika products:-

The RUT500, RUT900, RUT950 and RUT955 routers are all supplied with DIN Rail Mounting Kit and UK mains power supply.


Teltonika RUT500 New 3G Module supports up to 21Mbps

On March 27, 2013

We are pleased to announce that the new RUT500 UK 3G Router has been updated with a new high speed HSPA+ module offering 3.9G mobile connectivity with download speeds now up to 21Mbps.  This new version of the popular RUT500 also includes the upgraded hardware and new voltage range of 7-30VDC as well as the ability to provide power to the unit via one of the Ethernet Ports using basic POE connection.

These enhancements to the Teltonika RUT500 make this one of the best value M2M 3G routers available in the UK.

Teltonika RUT500

Teltonika RUT500 M2M 3G Router

The new 21Mbps RUT500 uses the leatest HSPA+ 3G module technology which offers quad band GSM and WCDMA (3G) connectivity with 3G/HSPA+ peak downlink speeds up to 21 Mbps and peak uplink speeds up to 5.76 Mbps.

Quad Band GSM 850/900/1800/1900 MHz
Quad Band WCDMA 850/900/1900/2100 MHz
RUT500 Powering OptionsThe RUT500 router can be powered from power socket (1) or over Ethernet port (applies only to the new hardware revision – not applicable to previous versions). Depending on your network architecture you can use LAN 3 (2) or WAN (3) Ethernet port to power the device.

RUT500 powering options

RUT500 can be powered from power socket and over Ethernet simultaneously. Power socket has higher priority meaning that the device will draw power from power socket as long as it is available.

When RUT500 is switching from one power source to the other it loses power for a fraction of the second and may reboot. The device will function correctly after the reboot.

Do not use LAN3 and WAN port for powering RUT500 simultaneously.

Use pins 4 and 5 of Ethernet port to supply posite voltage and connect pins 7 and 8 ground.

RUT500 POW Wiring Diagram

Though the device can be powered over Ethernet port it is not compliant with IEEE 802.3af-2003 standard. Powering RUT500 from IEEE 802.3af-2003 power supply

will damage the device as it is not rated for input voltages of PoE standard.

* – New hardware revision has

7 – 30VDC written on the device sticker while older revision has 9V – 1A


Configurable WAN Port

The Teltonika RUT500 is supplied as standard with 3 x 10/100 LAN Ethernet Ports and 1 x 10/100 WAN Ethernet Port, however for users that require a 3G router with 4 x LAN ports and no requirement for a WAN port then the RUT500 can be configured using SSH to change the WAN port into a fourth LAN port.  We will shortly have instructions available to show you how to do this but if you need information in the meantime please contact us.

The new improved Teltonika RUT500 3G router is already available from stock in the UK for next working day delivery – call the 3G router store on 0800 508 8366 to place your order.


Teltonika RUT500 HSPA+ Router

On August 30, 2012

The RUT500 is part of the next generation of industrial grade, M2M HSPA+ 3G Routers from Teltonika, a leading manufacturer of 3G Routers including the popular RUT104 and RUT105 .  The Teltonika RUT500 is the latest in the 3G Router range and replaces both the RUT105 and RUT104 models and is packed with features and updates making this one of the best value M2M 3G routers available in the UK today.


RUT500Teltonika RUT500

Teltonika RUT500 M2M 3G Router


CLICK HERE for RUT500 Datasheet

The new RUT500 HSPA+ 3G Router provides additional wired LAN connectivity in the form of 3 x 10/100 Ethernet LAN ports and also includes a extra Ethernet WAN port for WAN connectivity so the RUT500 can be used as a failover 3G router.  The Teltonika RUT500 router also includes high speed N Wireless WiFi connectivity for wireless LAN connections.

Housed in a robust Aluminium casing with advanced keep alive features to ensure a reliable 3G connection, the teltonika RUT500 is an ideal choice for use as a 3G router to provide high speed mobile broadband connectivity for a range of M2M applications including 3G CCTV, Digital Signage, Wind Turbines and Solar installations to name but a few.

The RUT500 router uses embedded HSPA+ Modem technology to deliver high speed mobile broadband with download speeds up to 14.4Mbps and upload speeds up to 5.76Mbps.

Teltonika UK RUT500

The Teltonika RUT500 is supplied in a compact form and is housing in a robust aluminium casing to provide a robust 3G router solution for use in an industrial environment.

Teltonika RUT500 Front View

Teltonika RUT500 Front View

Teltonika RUT500 Rear View

Teltonika RUT500 Rear View

The RUT500 3G Router is supplied with 2 x Elbow Joint 3G GSM Antennas with SMA/M antenna connectors (primary and auxiliary)  and 1 x Elbow Joint WiFi Antenna with Reverse SMA antenna connector.

Also supplied with the RUT500 is a DIN Rail Mounting kit to enable the router to be conveniently located.

RUT500 DIN Rail Mounting Kit

The RUT500 router is pre-drilled by the manufacturer to enable the connection of the DIN Rail mounting kit to prevent any issues with warranty claims.  Ensure that when buying the Teltonika RUT500 routers and you need the DIN Rail mounting kit you ask for units that are pre-drilled by the manufacturer or your unit may not be covered by warranty.  Teltonika routers from the 3G Router Store in the UK are pre-drilled and supplied with a free of charge DIN Rail Mounting kit so there are no warranty issues.